|
Post by gerr on Jan 26, 2008 16:14:17 GMT -5
Hi all! I have a problem with the NJT Gp40s. The problem is I get 2 error messages. The first says this: ERROR READING TRAIN DATABASE FILE LINE:105and the second says this: Trains/trainset/NJT4133/NJT4133.engIm not really sure on how to fix this, but I do know that there is obviously wrong with the ENG file withing the locomotive folder. Thanks for your help Anthony
|
|
|
Post by gerr on Jan 27, 2008 13:07:00 GMT -5
I tried today to look at the ENG file in word, but I still can figure out whats wrong with it. I will keep on trying to fix it and if anyone would like to help, that would be great. Thanks Anthony
|
|
|
Post by Kurt K on Jan 27, 2008 13:48:40 GMT -5
Anthony, are you running MSTSbin?
-Kurt
|
|
|
Post by gerr on Jan 27, 2008 16:02:57 GMT -5
Nope, and I know I need it, but I did not think that was going to be the big problem though. I have been play MSTS for a long time with out bin and I never had a problem with anything. If this is the case where I need it, does anyone know where I can get Bin1.7? Thanks Anthony
|
|
|
Post by Kurt K on Jan 27, 2008 18:22:37 GMT -5
BIN is required on most of the latest KLW locomotives for proper lighting definitions, the GP40FH and PH locomotives being examples of this. Trying to run without BIN will result in .ENG errors such as these.
There is a link to BIN over at Train-Sim.com's BIN forum - it's the sticky topic right at the top. Make sure to install the SD40-2 Content Update and the v1.2 (really v1.4) Train-Simulator update; these two files are available from Obo's MSTS Site/Catalog.
-Kurt
|
|
|
Post by gerr on Jan 27, 2008 19:53:55 GMT -5
Thanks Kurt, it works just fine. ;D
|
|